550 turnkey facilities
24/7 in touch with clients
We work with facilities of any complexity
We select an optimal solution
We provide official guarantees
Free visit to the facility and engineer consultation
We know the value of your time, so we make a commercial offer as soon as possible.
The design of ventilation and air conditioning systems is based on the following documents provided by the client:
architectural and construction drawings of the building;
terms of reference for the design of ventilation and air conditioning systems agreed with the client
detailed engineering design (for premises and production areas)
design data on existing electrical capacities.
What risks are incurred by the client in implementing ventilation and air conditioning systems without a design?
an inability of the ventilation system to cope with pollutant emissions, and their concentration in the air rises to unacceptably high levels.
choosing the wrong place to install the equipment leads to a noticeable noise level in the room;
ignoring the need to calculate the room air-thermal balance leads to a transfer of odours into the room;
an incorrect design of air ducts results in whistling, humming, and vibration of the system.
unless the duct network is planned in advance, unwanted overlaps can occur and cause the need to lower the ceiling;
the excessive power and energy consumption of the ventilation system and, as a consequence, considerable financial losses in installing and operating the ventilation and air conditioning system.
a complex network with a scheme that is unsuitable for adjustment
the need for constant repair of system components
Choosing a professional contractor is the No. 1 task when ordering a ventilation and air conditioning design
We design ventilation and air conditioning systems with the aid of specialized software, which ensures that drawings and calculations are completed in a shorter time.
Errors in the design phase are costly in the operation phase
Lack of space
Placement of ventilation equipment in rooms that are not large enough. But these savings result in direct losses
Lack of necessary nodes
The design does not contain the necessary components and fittings necessary for dismantling heat exchangers during their repair or cleaning.
Lack of balancing fittings
To keep costs down, designers do not include balancing valves in heating and cooling ventilation nodes. This in turn makes it impossible to measure liquid flow rate. Lack of metering makes it impossible to check the performance of heat exchangers, which significantly increases the operational risks.
Failure to account for existing service lines
When planning a design, designers do not take into account existing service lines, sometimes the ductwork is not routed through the girders. In this situation, installers are forced to deviate from the design, i.e. come up with their own, “shrink” air ducts. This does not have a positive impact on the efficiency of the ventilation system.
Lack of measuring equipment
To control the flow and temperature of the fluid, one needs the right gauges: thermometers and manometers, but often they are not present even in the design itself. This also increases operational risks.
Why do customers contact us to design ventilation and air conditioning systems?
Systematic approach
When creating a design, we take into account all the features of the facility, i.e. location, climatic conditions, building architecture, terms of reference and technological purpose.
Solving non-standard tasks
Our extensive experience and our specialist’s in-depth knowledge allow us to take on non-standard facilities and offer solutions to even the most challenging tasks.
Flexible payment system
We optimize the customer’s costs, taking into account all the features of the building’s architecture in accordance with state and building codes and requirements.
Functional equipment configuration
At the design stage, we select the most functional and reliable system equipment depending on the tasks and budget. We directly cooperate with well-known manufacturers of ventilation and climatic equipment.
Professional design and turnkey installation
Our company has license No. 2013047684, which confirms high qualification in the installation of engineering ventilation networks. This allows our specialists to make a competent design and implement it in your facility.
Installers take into account the special conditions of the facility, they are ready to adapt their methods to the circumstances and promptly resolve any inconsistencies so that you get a working system that fully complies with the design.
Transparency of all solutions
We do not offer solutions that cannot be explained by functional purpose. If you have any questions, our design department will tell you in detail why such a solution is needed at your facility.
Our professionalism is confirmed
To put the facility into operation, it is necessary to have all the necessary documents and permits, be sure of the safety of the structure and the quality of work. A construction license is required for facilities of IV and V categories of complexity. These are buildings that are designed to accommodate more than 300 people. This category includes educational institutions, shopping centers, railway stations, government agencies, hotels, etc.
Provides permission to carry out activities for installation, maintenance and repair of fire safety equipment of buildings and structures.
This type of work is performed by professionals using special equipment. The mobility and reliability of such equipment allow for performing all types of construction or repair services, as well as installation and dismantling.
Works performed in areas of permanent or possible exposure to hazardous production factors, the occurrence of which is not related to the nature of the work performed, which require the development and implementation of additional safety measures for each specific production operation before the start of these works.
High-risk works are performed with a work permit.
Employees belonging to electrical and electro technical personnel must pass a test of knowledge of requirements. Rules and other safety requirements for the organization and performance of work in electrical installations within the requirements for the relevant position or profession.
1 year
warranty for work
2 to 5 years
equipment warranty
Design stages
1. Drawing up terms of reference
At the initial stage of the design, it is necessary to get terms of reference. SMARTKOMPLEKT specialists prepare terms of reference that meet the requirements of the Customer and provide support at the stages of development and approval.
2. Preparation of design documents
The design department of the SMARTKOMPLEKT company begins to prepare design documents, coordinating all the details of architectural and construction documents.
The design is made taking into account the features of the climatic region, the functional purpose of the premises, and the norms and requirements of the technical and technological tasks.
3. Calculation
At this stage, heat losses and heat inflows are calculated, which are compensated by air conditioning and ventilation systems. Then the calculation and tracing of ventilation ducts are made. Axonometric drawings of ventilation and air conditioning systems are developed.
4. Equipment selection
Selection of the main equipment: ventilation units, chillers, heating radiators, fan coils, as well as auxiliary equipment.
5. Tasks for installation teams.
Tasks for general construction, welding, electrical and plumbing works are being developed for installation teams.
Feedback about us
Our projects
Do you have any other questions?
Get a free consultation from our expert
Call by phone +38 (068) 767 13 68
or leave a request
